5ghz mpls

SXT 5HND Point to Point MPLS

This is an example shows how the bridge be done using MPLS instead of WDS. Bridge: /interface wireless set wlan1 adaptive-noise-immunity=ap-and-client-mode band=5ghz-onlyn basic-rates-a/g=”” country=australia disabled=no frequency=5180 frequency-mode=manual-txpower ht-ampdu-priorities=0,1,2,3,4,5,6,7 ht-extension-channel=below-control ht-rxchains=0,1 ht-txchains=0,1 mode=bridge rate-set=configured ssid=wifinederland.nl supported-rates-a/g=”” wireless-protocol=nv2 /ip address add address=172.16.0.1/30 interface=wlan1 /mpls ldp set enabled=yes lsr-id=172.16.0.1 transport-address=172.16.0.1 /mpls ldp interface add interface=wlan1 /interface vpls add Read more about SXT 5HND Point to Point MPLS[…]